Sa Pf Motor - Citizen CL-E720DT Technical Manual

3-6-13. SA PF Motor

1. Remove the "Cover PF Motor". Refer to
2. Remove the "Unit Opepane". Refer to
3. Remove the "Case" and "Cover Steel L". Refer to
4. Remove all connectors from the "SA Main PCB". Refer to
Connectors".
5. Remove the "Unit Mechanism". Refer to
Tips: The "SA PF Motor (with Thermistor)" can be removed without detaching the "Unit
Mechanism".
6. Remove the 2 screws (BH M3.0x4 (NI)) and detach the PF Motor Block.
7. Remove the 2 screws (BH M3.0x4 (NI)) and detach the "Plate Motor Bracket" from the "SA PF
Motor (with Thermistor)".
BH M3.0x4 (NI)
J602
SA PF Motor (with Thermistor)
Letter
"C"
Notes on reassembling:
• Referring to the above magnified view, mount the "Plate Motor Bracket" on the "SA PF Motor
(with Thermistor)" so that its letter "C" is located on the connector side of the "SA PF Motor (with
Thermistor)".
• Mount the "SA PF Motor (with Thermistor)" on the frame so that its connector faces the front.
"3-6-2 Cover PF
"3-6-3(1) Unit Opepane".
"3-6-4
"3-6-6 Unit Mechanism".
J603
Plate Motor Bracket
BH M3.0x4 (NI)
3-33
Chapter 3 Disassembly and Maintenance
3-6. Disassembly, Reassembly and Lubrication
Motor".
Case".
"3-6-5(1) "SA Main PCB"
CL-E720DT