Programming Of The Time-Out Value; Programming Of The Gateway Number - Sharp UP-600 Instruction Manual

(2) Programming of the time-out value

The time-out value for receiving the data can be specified by the following procedure:

(3) Programming of the gateway number

The gateway number can be specified by the following procedure:
1.
Turn the mode switch to the PGM2 position.
2.
Select "MWS SETTING" and press the [ENTER] key.
The MWS SETTING window will appear.
3.
Enter the time-out value (1 - 255 (sec)) and press the
[ENTER] key.
NOTE:
This value will depend upon the application. Please
consult your authorized SHARP dealer.
1.
Turn the mode switch to the PGM2 position.
2.
Select "MWS SETTING" and press the [ENTER] key.
The MWS SETTING window will appear.
3.
Enter the gateway number (1 - 254) for "G.W.
ADDR.4" and press the [ENTER] key.
45