Chapter 3 Installing A Network Module; Network Modules Overview - Cisco Catalyst 9300 Series Hardware Installation Manual

Installing a Network Module
•
•
•
•
•

Network Modules Overview

The Cisco Catalyst 9300 Series Switches supports the following optional network modules for uplink ports.
Network Module
C9300-NM-4G
C9300-NM-8X
C9300-NM-2Q
C3850-NM-4-1G
C3850-NM-2-10G
Network Modules Overview, page 39
Installing a Network Module in the Switch, page 40
Removing a Network Module, page 48
SFP and SFP+ Modules, page 49
Finding the Network Module Serial Number, page 51
Description
This module has four 1G SFP module slots. Any combination of standard SFP
modules are supported.
Note
This module has eight 10G SFP+ module slots.
Note
This module has two 40G QSFP+ module slots.
Note
This module has four 1 G SFP module slots. Any combination of standard SFP
modules are supported. SFP+ modules are not supported.
If you insert an SFP+ module in the 1 G network module, the SFP+ module does
not operate, and the switch logs an error message.
This module has four slots. Two slots (left side) support only 1 G SFP modules
and two slots (right side) support either 1 G SFP or 10 G SFP modules.
C H A P T E R
Supported only on Cisco Catalyst 9300 Series
Switches.
Supported only on Cisco Catalyst 9300 Series
Switches.
Supported only on Cisco Catalyst 9300 Series
Switches.
Cisco Catalyst 9300 Series Switches Hardware Installation Guide
3
39