OfficeServ 7200 Installation Manual/Ed.00
3.1.2 MGI Module
The procedure for setting the MGI Module switches and mounting optional
Modules is as follows:
1) Set memory backup switches of the MGI Module.
2) Align the connector of the MGI Module to the connector of the optional
Module (MGI2D) and press the optional Module downward. Up to four
optional Modules can be mounted.
© SAMSUNG Electronics Co., Ltd.
Figure 3.11 MGI Module Switch Setting
MGI2D
Figure 3.12 Mounting Optional Module on MGI Module
CHAPTER 3. Mounting and Replacing Modules
OFF : No memory backup
ON : Available for memory backup
(default value)
MGI2D
MGI2D
MGI2D
Page 3-11