Procedure For Connecting External Battery; Figure 4.1 Connecting An External Battery - Samsung OfficeServ 7200 Installation Manual

CHAPTER 4. Connecting External Batteries
2

Procedure for Connecting External Battery

The procedure for using a battery cable to connect an external battery to the
OfficeServ 7200 system is as follows:
1) Prepare the battery cable that was provided with the OfficeServ 7200 system.
An end of this battery cable consists of a white line and a black line.
2) Connect the white line of the battery cable to the(+) terminal, and the black
line to the(-) terminal of the battery. Then, connect the other end of the battery
cable to the external battery socket on the rear panel of the OfficeServ 7200
Chassis. When using two or more OfficeServ Chassis, prepare as much
external batteries as the number of Chassis and connect the batteries to each
Chassis.
Page 4-2

Figure 4.1 Connecting an External Battery

OfficeServ 7200 Installation Manual/Ed.00
© SAMSUNG Electronics Co., Ltd.