Ch3. Installation And Setting; Power Input; Connecting To Monitor - Samsung SNS-100/400 User Manual

SNS-100/400 Network Server

Ch3. Installation and Setting

3.1. Power Input

DC Power
Only DC12V power may be supplied to this product.
When using an adapter different from the one supplied by us (DC12V/4A), make sure that it is DC12V/2A or higher.
DC Only
For SNS-400, the recommended adapter specs are DC12V/2A, therefore, only use standard adapters.
Chart 3-1 When the copper wire's resistance is [20℃(68℉)]
Copper Wire Size (AWG)
Resistance (Ω/m)
DROP Voltage(V/m)
As seen in Chart 3-1, a voltage drop occurs and thus, in the case that the adapter output wire's length is excessively connected
to the network, a problem can occur with the network server.
※ Server Operation Voltage: DC 12V±10%
※ Depending on the type and manufacturer of the voltage load wire described in the above chart, there may be a deviation.

3.2. Connecting to Monitor

Connect the video output terminal on the back of the product to the monitor input terminal.
Connection methods may differ depending on the used monitor and peripheral devices, so please refer to the users' manual.
Always connect after turning the device's power off.
12
#24(0.22㎟) #22(0.33㎟)
0.078
0.028
SNS-100 Network Server
#20(0.52㎟)
0.050 0.030
0.018 0.011
Monitor
#18(0.83㎟)
0.018
0.06