High-Speed Settings (Cycle832) - Siemens SINUMERIK 840D Operating Manual

Programming technological functions (cycles)
8.6 Further cycles and functions
Procedure
Parameter Description
TC Name of the swivel data set
No: No retraction before swiveling
Retract 
Z: Retraction in the direction of machine axis Z

Tool direction, max.: Maximum retraction in tool direction

Tool direction, inc.: Incremental retraction in tool direction

ZR Retraction path - (only for incremental retraction in the tool direction)
β Rotation around the 3rd geometry axis (for G18 Y)
Tool Tool tip when swiveling
Correct

The position of the tool tip is maintained during swiveling.
No correction

The position of the tool tip is not maintained during swiveling.
8.6.3

High-speed settings (CYCLE832)

Function
Machining of free-form surfaces involves high requirements regarding velocity, precision and
surface quality.
You can achieve optimum velocity control depending on the type of processing (roughing,
rough-finishing, finishing) very simply with the "High Speed Settings" cycle.
Program the cycle in the technology program before the geometry program is called.
The "High Speed Settings" cycle is also in conjunction with the "Advanced Surface" function.
416
1. The part program to be executed has been created and you are in the
editor.
2. Press the "Various" softkey.
3. Press the "Swivel tool" and "Align milling tool" softkeys.
The "Align milling tool" input window opens.
Software option
You require the software option in order to use this function:
"Advanced Surface"
Operating Manual, 03/2010, 6FC5398-7CP20-1BA0
Unit
Degrees
Milling