Setup Data; Backing Up Setup Data - Siemens SINUMERIK 840D Operating Manual

13.13

Setup data

13.13.1

Backing up setup data

Apart from programs, you can also save tool data and zero point settings.
You can use this option, for example, to back up tools and zero point data for a specific
machining step program. If you want to execute this program at a later point in time, you will
then have quick access to the relevant settings.
Even tool data that you have measured on an external tool setting station can be copied
easily into the tool management system using this option.
Backing-up job lists
If you wish to backup a job list, which contains ShopMill and G code programs, you obtain
dedicated selection boxes to backup the tool data and zero points.
Backing up data
Data
Tool data
Tool data for ShopMill programs
-- only available for job list with
ShopMill and G code programs
Tool data for G code programs
-- only available for job list with
ShopMill and G code programs
Magazine assignment
Zero points
Zero points for ShopMill programs
-- only available for job list with
ShopMill and G code programs
Zero points for G code programs
-- only available for job list with
ShopMill and G code programs
Milling
Operating Manual, 03/2010, 6FC5398-7CP20-1BA0
No

All used in the program (only for ShopMill program and job

list with ShopMill programs)
Complete tool list

No

All used in the program

Complete tool list

No

Complete tool list

Yes

No

No

The selection box "Basis zero point" is hidden
All used in the program (only for ShopMill program and job

list with ShopMill programs)
All

No

The selection box "Basis zero point" is hidden
All used in the program

Complete tool list

No

The selection box "Basis zero point" is hidden
All

Program management
13.13 Setup data
523