Creating a ShopMill program
7.17 Example, standard machining
2. Rectangular spigots, face milling
248
ZI
RP
SC
Machining direction
Retraction position
pattern
2.
Press the "Accept" softkey.
The work plan is displayed. Program header and end of program are
created as program blocks.
The end of program is automatically defined.
1.
Press the "Milling" and "Face milling" softkeys.
2.
Enter the following technology parameters:
T FACING TOOL
3.
Enter the following parameters:
Machining
Direction
X0
Y0
Z0
X1
Y1
Z1
DXY
DZ
UZ
4.
Press the "Accept" softkey.
-20 abs
100
1
Climbing
Optimized
D1
F 0.1 mm/tooth
Roughing (∇)
-2,5 abs
-2,5 abs
1 abs
185 abs
185 abs
0 abs
80 %
2,0
0
Operating Manual, 03/2010, 6FC5398-7CP20-1BA0
V 750 m/min
Milling