Siemens SINUMERIK 840D Operating Manual page 473

Column heading
M1 - M4
You use the configuration file to specify the selection of parameters in the list.
Icons in the tool list
Icon/
Designation
Tool type
Red "X"
Yellow triangle pointing
downward
Yellow triangle pointing
upward
Green border
Magazine/location number
Green double arrow
Gray double arrow
(configurable)
Red "X"
Milling
Operating Manual, 03/2010, 6FC5398-7CP20-1BA0
Meaning
Direction of spindle rotation
Spindle not switched on
CW spindle rotation
CCW spindle rotation
Coolant supply 1 and 2 (e.g. internal and external cooling) can be
switched on and switched off.
The coolant supply at the machine does not necessarily have to be set-
up.
Other tool-specific functions such as additional coolant supply, monitoring
functions for speed, tool breakage, etc.
Software option
In order to be able to manage the parameter spindle direction of rotation,
coolant and tool-specific functions (M1-M4), you require the
"ShopMill/ShopTurn" option.
Machine manufacturer
Please refer to the machine manufacturer's specifications.
Meaning
The tool is disabled.
The prewarning limit has been reached.
The tool is in a special state.
Place the cursor on the marked tool. A tooltip provides a
short description.
The tool is preselected.
The magazine location is positioned at the change position.
The magazine location is positioned at the loading position.
The magazine location is disabled.
Tool management
12.5 Tool list
473