Siemens SINUMERIK 840D Operating Manual page 389

Procedure
Parameter
Contour selection
Contour name
Labels
Subprogram
Labels in the
subprogram
Milling
Operating Manual, 03/2010, 6FC5398-7CP20-1BA0
1. The part program to be executed has been created and you are in the
editor.
2. Press the "Turning" and "Contour turning" softkeys.
3. Press the "Contour" and "Contour call" softkeys.
The "Contour Call" input window opens.
4. Assign parameters to the contour selection.
Description
Contour name

Labels

Subprogram

Labels in the subprogram

CON: Contour name
LAB1: Label 1

LAB2: Label 2

PRG: Subprogram
PRG: Subprogram

LAB1: Label 1

LAB2: Label 2

Programming technological functions (cycles)
8.5 Contour turning - only for G code programs
Unit
389