The Back Panel - TP-Link TD854W User Manual

Error! AutoText entry not defined.

Note:
1. If the ADSL LED is off, please check your Internet connection first. Refer to
the Modem Router
you have already made a right connection, please contact your ISP to make sure if your
Internet service is available now.
2. If the Internet LED is off, please check your ADSL LED first. If your ADSL LED is also off,
please refer to Note
configuration. You may need to check this part of information with your ISP and make sure
everything have been input correctly. Refer to
information.

2.2 The Back Panel


ADSL: Through the port, you can connect the router with the telephone. Or you can connect
them by an external separate splitter. For details, please refer to 2.4.

RESET: There are two ways to reset the Router's factory defaults.

1, 2, 3, 4 (LAN): Through the port, you can connect the Router to your PC or the other
Ethernet network devices.
Method one: With the Router powered on, use a pin to press and hold the Reset button for at
least 5 seconds. And the Router will reboot to its factory default settings.
Method two: Restore the default setting from "Maintenance-SysRestart" of the Router's
Web-based Utility.

POWER: The Power plug is where you will connect the power adapter.
Error! AutoText entry not defined. User Guide
for more information about how to make Internet connection correctly. If
1. If your ADSL LED is GREEN ON, please check your Internet
Figure 2-2
5
4.1.1 Device Info and
2.4 Connecting
4.2.1 WAN for more