TP-Link TD854W User Manual page 36

Error! AutoText entry not defined.

Disable Wireless LAN Interface: Choose to disable the Wireless function of the ADSL
Router.
 Band: Options available are 2.4 GHz (B), 2.4 GHz (G), 2.4 GHz (B+G), 2.4 GHz (N), 2.4 GHz
(G+N), and 2.4 GHz (B+G+N).
 Mode: Options are AP and AP+WDS. If AP+WDS is selected, then the Router can bridge two
or more WLANs.

SSID: Wireless network name shared among all points in a wireless network. The SSID must
be identical for all devices in the wireless network. It is case-sensitive and must not exceed 32
characters (use any of the characters on the keyboard). Make sure this setting is the same for
all stations in your wireless network. Type the desired SSID in the space provided.

Channel Width: Select the width you want to use from the drop-down List. There are three
options, 20MHz, 40MHZ and 20/40MHz. If bigger bandwidth is selected, device could transmit
and receive data with higher speed.
 Control Sideband: Options are Upper and Lower.

Radio Power (Percent): Here you can specify the Radio Power of Router. You can select
High, Middle or Low which you would like. High is the default setting and is recommended.
 Associated Clients: Click the Show Active Clients button to view the information of
wireless clients that connects to the ADSL Router.
After configuration, click Apply Changes button to save your changes.
Error! AutoText entry not defined. User Guide
Figure 4-14
30