Table of Contents
Advertisement
Error! AutoText entry not defined.
You can enable or disable the port mapping function of the device by the select radio button. If
"Enable" radio is selected, you can configure the mapping group as follow steps.
Select a group （Group 1, Group 2, Group3 or Group 4） from the table, then you can see the
1.
available interface (LAN and WAN) and grouped interface list
2.
Select interfaces from the "WAN" and "LAN" interface list and add it to the "Interface group"
using Add> button or delete it from the "Interface group" using >Del button to manipulate the
required mapping of the ports.
3.
Click the Apply button to finish the configuration.
Error! AutoText entry not defined. User Guide
Figure 4-37
60
Hide quick links:
Advertisement
Table of Contents
