TP-Link TD854W User Manual page 53

Error! AutoText entry not defined.
 Enable DMZ: Check the box to enable DMZ function.

DMZ Host IP Address: Enter the specified IP Address for DMZ host on the LAN side.
Click Apply Changes to save your configuration.

Note:
If changes are made, after clicking Apply Changes button, a Save button will appear on the left
panel. You need to click the Save button to make your changes take effect.
4.3.2.2 Virtual Server
Choose "Advanced→NAT→Virtual Server", and then you can configure the Virtual Server in the
screen as shown in Figure 4-28.
The Virtual Server is the server or server(s) behind NAT (on the LAN). It allows a single host on
your LAN to provide the specified service to the Internet, for example Web server or FTP server,
which you can make visible to the outside world even though NAT makes your whole inside
network appear as a single machine to the outside world.
Error! AutoText entry not defined. User Guide
Figure 4-27
47