TP-Link TD854W User Manual page 26

Error! AutoText entry not defined.

Current ATM VC Table: ATM settings are used to connect to your ISP. Your ISP provides
VPI (Virtual Path Identifier), VCI (Virtual Channel Identifier) settings to you. In this Device,
there is one VC configured by default. You can totally setup 8 VCs on different encapsulations,
if you apply 8 different virtual circuits from your ISP. You need to activate the VC to take
effect.
 : Click this icon to enter the VC modification page. Besides, some advanced settings
can be configured there.
: Click this icon to delete the corresponding VC.

 VPI: Identifies the virtual path between endpoints in an ATM network. The valid range is
from 0 to 255. Please input the value provided by your ISP.
VCI: Identifies the virtual channel endpoints in an ATM network. The valid range is from

32 to 65535 (1 to 31 is reserved for well-known protocols). Please input the value
provided by your ISP.
Error! AutoText entry not defined. User Guide
Figure 4-4
20