Intercom - AT&T TL86109 User Manual

Multiple handset use

Intercom

NOTES:
1. You can cancel the intercom call before it is answered by pressing
your originating handset.
2. If the destination handset does not answer the intercom call within 100 seconds, is in
the directory or call log, or is out of range, the originating handset displays Unable to
call try again and returns to idle mode.
3. You can use a maximum of five handsets at a time. For example, when four handsets
are used on intercom calls, use another handset for an outside call. When two handsets
are used on an intercom call, you can use three other handsets for an outside call.
Use a telephone base:
1. Press the MENU softkey on the handset in idle mode.
2. Press CID or DIR to highlight Intercom, then press
the SELECT softkey.
• If you have a one-handset system, your handset
displays Calling HANDSET. The telephone base rings
and displays HANDSET is calling.
• If you have a more than one handset system, your handset displays
INTERCOM TO:. Press CID or DIR to choose a destination handset
then press the SELECT softkey. Your handset displays Calling HANDSET
X and the destination handset rings and displays HANDSET X is calling.
You may also press 1-9 for HANDSET 1-9, *0 for HANDSET 10, *1 for
HANDSET 11 or *2 for HANDSET 12.
To answer an intercom at the destination handset:
• Press LINE 1/
Intercom.
To silence an intercom call:
• Press the SILENCE softkey on the destination handset. Its screen displays
Ringer muted for a few seconds.
To mute while on an intercom call:
• Press the MUTE softkey on the handset or telephone base. Its screen
displays Microphone off for a few seconds.
To end an intercom call:
• Press SPEAKER
the destination handset, or place the handset back in the charger. Both
handsets display Intercom ended.
, LINE 2/
FLASH FLASH
on the telephone base, or press
or /SPEAKER. Both screens show
76
OFF/ on
CLEAR
Directory
Cal l log
Bluetooth
Intercom
SELECT
INTERCOM TO:
HANDSET 1
HANDSET 2
HANDSET 3
BACK SELECT
OFF/ on
CLEAR