AT&T TL86109 User Manual page 53

Telephone settings
Answering system settings
Use the telephone base to set the announcement:
1. Press the MENU softkey on the telephone base in idle
mode to enter the main menu.
2. Press CID or DIR to scroll to Answering sys, then
press the SELECT softkey.
3. Press CID or DIR to choose Mailbox 1 or Mailbox 2,
then press the SELECT softkey.
4. Press the SELECT softkey again to choose
Announcement.
5. Press CID or DIR to highlight Annc mode and then
press the SELECT softkey.
6. Press CID or DIR to scroll to A & B schedule, then
press the TIMES softkey.
7. The handset displays ANNC A BEGINS. Press
DIR or the dial keypad to set the time for Annc A.
Press the NEXT softkey to confirm.
8. The handset displays ANNC B BEGINS. Press
DIR or the dial keypad to set the time for Annc B.
Press the SET softkey to confirm.
NOTES:
1. If the clock is not set, the handset or telephone base displays To use A & B schedule,
system clock must be set. Set the time and date (pages 34 and 42) before you set the
announcement mode.
2. If the answering system is off when you attempts to record an outgoing announcement,
the system will automatically turns on. If the memory is full, the answering system
announces, "Memory is full. Calls will not be answered."
CID or
CID or
47
ANNOUNCEMENT
Annc audio
Annc mode
SELECT
ANNC MODE
Annc A only
Annc B only
A & B schedule
TIMES SET
ANNC A BEGINS
09:00 AM
NEXT
ANNC B BEGINS
06:00 PM
SET
- ANNC A -
09:00AM - 05:59PM
- ANNC B -
06:00PM - 08:59AM
NEXT