AT&T TL86109 User Manual page 24

Bluetooth
Bluetooth setup
9. The telephone base displays Connect headset
to base? Press the YES softkey to confirm. The
telephone base displays Device connected to the
base and the corresponding status icon (
display when the headset is successfully connected.
The corresponding light on the telephone base
(DEVICE A or DEVICE B) turns on.
• When you already have two devices on the active
devices list, the screen displays Max. connectable
devices is two and you are prompted to replace an existing device
on the active devices list (page 23).
• When you already have one headset on the active devices list, the
handset shows Only 1 headset can be connected. You are prompted
to replace the headset on the active devices list. The screen displays
Replace currently active headset? Press the YES softkey to replace
the existing headset on the active devices list.
NOTE: The pairing process may take up to one minute. If the pairing process fails,
try again.
A or
18
Connect headset
to base?
B)
YES
Device
connected
to the base
NO