Cisco IW3702 Getting Started Manual page 38

Item
Antenna
Outdoor Cisco Aironet Dual-Band MIMO Wall-Mounted Omnidirectional Antenna and Access Point for Indoor Use Scenario
Table 15: Outdoor Dual-Band MIMO Wall-Mounted Omnidirectional Antenna and Access Point for Indoor Use Scenario
Item
Antenna Arrangement
Access Point
Adapter and/or Lightning Arrestor
38
Description
1 x Cisco Aironet AIR-ANT2544V4M-R dual-band MIMO
wall-mounted omnidirectional antennas are required. The
antenna specifications are:
• 2400-2484 MHz, 5150-5850MHz dual-band WiFi
operating frequency range
◦ Bands 5150-5350MHz are not supported for
outdoor installations within Regulatory Domain E
• MIMO, omnidirectional operation
• 4 dBi (2.4 GHz), 4 dBi (5.8 GHz) gain
• Indoor or outdoor operation, -40 to 158°F (-40 to +70°C)
operating temperature range
• 4 x integrated cables with RP-TNC (plug) connector
• Cisco PID AIR-ANT2544V4M-R
Description
1 x Cisco Aironet AIR-ANT2544V4M-R dual-band MIMO
wall-mounted omnidirectional antenna mounted remotely
outdoors.
IW3702-2E-x-K9, IW3702-4E-x-K9, IW3702-2E-UXK9 or
IW3702-4E-UXK9
4 x DC pass, N(f)-N(f) lightning arrestors, Cisco PID
CGR-LA-NF-NF.
Lightning arrestors must be appropriately grounded
Note
to infrastructure system ground designed to conduct
lightning currents to Earth ground.
This configuration assumes that the lightning arrestor
is mounted on a building or enclosure penetration
panel, and that it is interfaced on both sides with N(m)
cables.