Cisco IW3702 Getting Started Manual page 36

Item
Antenna
Indoor Cisco Aironet Four-Element MIMO Dual-Band Ceiling Mount Omnidirectional Antenna and Access Point
Table 13: Indoor Four-Element MIMO Dual-Band Ceiling Mount Omnidirectional Antenna and Access Point
Item
Antenna Arrangement
Access Point
Adapter and/or Lightning Arrestor
Indoor Cable
Outdoor Cable
36
Description
1 x Cisco Aironet AIR-ANT2513P4M-N four-port dual-band
polarization-diverse array antenna is required. The antenna
specifications are:
• 2.4-2.5 GHz, 5.15-5.925 GHz dual-band WiFi operating
frequency ranges
• 13 dBi peak gain
• Type N(f) connector
• IP67 rated, -40 to 185°F (-40°C to 85°C) operating
temperature range
• Cisco PID AIR-ANT2513P4M-N
Description
1 x Cisco Aironet AIR-ANT2524V4C-R indoor four-element
MIMO dual-band ceiling mount omnidirectional antenna
directly connected to the access point. Antennas are indoor
only.
IW3702-2E-x-K9, IW3702-4E-x-K9, IW3702-2E-UXK9, or
IW3702-4E-UXK9
You need:
• 4 x N(m) to RP-TNC (jack), RF coax adapters. Cisco
PID AIR-ACC370-NM-RF.
Note No lightning arrestors are
required.
For indoor cable routing, the deployment must balance the
requirements of Fire Code, Electrical Code, and any other
applicable regulations, versus RF cable type, cost, RF cable
length, and RF cable insertion loss.
N/A