Cisco IW3702 Getting Started Manual page 10

Message Type
Boot loader errors
Cisco IOS errors
AP status when provisioned by Cisco
AirProvision
PWR Connectors
There are two options for powering the access point:
• DC input over the PWR connector.
• PoE inline power over the PoE IN port.
10
LED Color
Red
Blinking red-blue
Blinking red-off
Red
Cycling blue-green-red-off
Cycling red-green-off
Blinking white
Blinking teal (for 15 seconds)
Blinking blue
Chirping red
System State
DRAM memory test failure.
FLASH file system failure.
Environment variable failure.
Bad MAC address.
Ethernet failure during image recovery.
Boot environment failure.
No Cisco image file.
Boot failure.
Software failure. Disconnect and
reconnect unit power.
General warning. Insufficient inline
power.
AP waiting to be primed.
AP priming via Cisco NDP in progress.
AP upon successful connection to Cisco
AirProvision.
AP priming via Cisco AirProvision in
progress.
AP primed to wrong regulatory domain.