Ffex8; Ffex16; Fax File Types; Requirements - Multitech FF-240 Hardware And Installation Manual

FFEX8

Current (AMPS)
Watts

FFEX16

Current (AMPS)
Watts
Multi-Tech Systems, Inc. recommends that the customer incorporate a 10% buffer into their power source when
determining product load.
1
Typical is the current while the module is powered up, but not sending or receiving faxes.
2
Maximum is the current while sending or receiving faxes.
3
Peak is the current while sending or receiving faxes.

Fax File Types

Users can fax the following document types through the web management interface. Additional options are
available through the FaxFinder Client.
PDF
PS
TIF or TIFF
TXT
Note: When printing from another application, FaxFinder sends the file as TIF images.

Requirements

The FaxFinder Fax Server is an IP enabled fax server that works with other devices and services on your
communication network to send and receive faxes and to perform administrative functions. FaxFinder requires:
The FaxFinder IP Fax Server works with other devices and services on your communication network to send and
receive faxes and to perform administrative functions. FaxFinder requires:
SMTP server access
Used to distribute FaxFinder emails that contain faxes, administrative notices, and log files.
Multi-Tech recommends that you create a DNS A record for FaxFinder.
Depending on the location of email recipients and IP resources, FaxFinder may also require WAN
access through your network's Internet gateway.
Analog phone lines that provide dial tone and ring voltage at traditional levels and cadence
To fully use FaxFinder's inbound fax routing, communication lines (PBX ports) need to pass direct inward
dial (DID) information in DTMF format to FaxFinder when the FaxFinder port goes off hook to answer a call.
®
FaxFinder Fax Server FF-240, FF-440, FF-840, FF240-IP Hardware and Installation Guide
1
Typical Maximum
0.837 0.895
7.59 8.11
1
Typical Maximum
1.430 1.560
12.81 13.95
2
Peak
0.940
--
2
Peak
1.630
--
PRODUCT OVERVIEW
3
3
11