Pulse Output Mark And Mask Function; Execution Completed Flag; Clear Instruction - Delta DVP-ES2 Operation Manual

DVP- ES2 / EX2 / SS2 / SA2 / SX2 / SE&TP O pe r a t i on Ma nua l - Pr ogr am m i ng
03: requested data exceeds the range.
07: checksum error
Function Group

Pulse output Mark and Mask function

M1108, M1110, M1156, M1158, M1538, M1540, D1026, D1027, D1135, D1136,
Number
D1232, D1233, D1234, D1235, D1348, D1349
Contents:
Please refer to explanations of API 59 PLSR / API 158 DDRVI / API 197 DCLLM instructions.
Function Group

Execution Completed Flag

Number M1029, M1030, M1102, M1103
Contents:
Execution Completed Flag:
MTR, HKY, DSW, SEGL, PR:
M1029 = ON for a scan cycle whenever the above instructions complete the execution.
PLSY, PLSR:
1. M1029 = ON when Y0 pulse output completes.
2. M1030 = ON when Y1 pulse output completes
3. M1102 = ON when Y2 pulse output completes.
4. M1103 = ON when Y3 pulse output completes.
5. When PLSY, PLSR instruction are OFF, M1029, M1030, M1102, M1103 will be OFF as well.
When pulse output instructions executes again, M1029, M1030, M1102, M1103 will be OFF
and turn ON when execution completes.
6. Users have to clear M1029 and M1030 manually.
INCD:
M1029 will be "ON" for a scan period when the assigned groups of data comparison is completed
RAMP, SORT:
1. M1029= ON when instruction is completed. M1029 must be cleared by user manually.
2. If this instruction is OFF, M1029 will be OFF.
DABSR:
1. M1029= ON when instruction is completed.
2. When the instruction is re-executed for the next time, M1029 will turn off first then ON again
when the instruction is completed
ZRN, DRVI, DRVA:
1. M1029 will be "ON" after Y0 and Y1 pulse output is completed. M1102 will be "ON" after Y2
and Y3 pulse output is compeleted.
2. When the instruction is re-executed for the next time, M1029 / M1102 will turn off first then ON
again when the instruction is completed.
Function Group

Clear Instruction

Number
M1031, M1032
Contents:
M1031 (clear non-latched memory), M1032 (clear latched memory)
Device
M1031
Clear non-latched area
M1032
Clear latched area
2 - 4 6
Devices will be cleared
Contact status of Y, general-purpose M and general-purpose S
 General-purpose contact and timing coil of T
 General-purpose contact, counting coil reset coil of C
 General-purpose present value register of D
 General-purpose present value register of T
 General-purpose present value register of C
Contact status of M and S for latched
 Contact and timing coil of accumulative timer T
 Contact and timing coil of high-speed counter C for latched
 Present value register of D for latched
 Present value register of accumulative timer T
 Present value register of high-speed counter C for latched