Installing Your Hard Drive - Western Digital WD Caviar Installation Manual

Installing Your Hard Drive

1. Thread the cable through the empty bay and slide in the
Western Digital hard drive.
2. Attach the end of the 40-pin interface cable to the 40-pin
connector on the back of the Western Digital hard drive.
Match pin socket 1 on the interface cable (the marked
wire) to pin 1 on the Western Digital hard drive. For dual
installations, connect the two hard drives together with a
3-connector interface cable.
Attaching the IDE Interface Cable and Power Supply Cable to
Note for Apple Installations: Use an Apple-supplied interface
cable only. Pin 40 on an Apple-supplied interface cable is
indicated by a color stripe on the cable.
8 Hardware Installation
the Hard Drive