Western Digital WD Caviar Installation Manual page 6

Eide hard drives
Table of Contents

Advertisement

Before Installing the Hard Drive
In the table below, write down the serial number, model
number, and CCC code listed on your new Western Digital
hard drive. The serial number is printed on the label containing
the bar code. The model number and CCC code are on the
large label at the top of the drive.
Serial Number:
Model Number:
If You Have an Existing Hard Drive Installed
Protect your data by backing up your existing hard drive before
installing your new Western Digital hard drive. Save the data to
removable media such as floppy disks or tape. Most operating
systems include a back up utility. Consult your operating
system or utilities documentation for back up instructions.
Access your CMOS setup screen and write down your existing
hard drive type and parameters (cylinders/heads/sectors).
Type:
Cylinders:
Heads:
* Typically these parameters match the cylinders, but in some
cases they are not used by the system.
2
Introduction
CCC Code:
Sectors Per Track:
*Landing Zone:
*Precomp:

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents