Tip: Handle your new Western
Digital FireWire Hard Drive
with care—do not drop or
jolt the drive.
CAUTION
Do not attempt to open the
drive and service it
yourself. Removing the
cover may expose you to
harmful electrical voltages
and will void the warranty.
CAUTION
Do not remove any labels
from the drive; this action
voids the warranty.
Mac Users
1. 30 MB hard drive space for program files
2. 24-bit color display adapter
Handling Precautions
Western Digital FireWire Hard Drives are precision instruments and
should be handled with care during unpacking and installation. These
drives may be damaged by rough handling, shock, or vibration. Be
aware of the following precautions when unpacking and installing
your Western Digital FireWire Hard Drive:
Do not unpack your Western Digital FireWire Hard Drive until
!
you are ready to install it.
Save all the packing materials in case you need to return your
!
Western Digital FireWire Hard Drive. Your warranty will be void
if your returned FireWire hard drive is shipped in anything other
than the original packaging or Western Digital supplied or
approved materials.
Do not drop or jolt the drive.
!
Do not attempt to open the drive and service it yourself.
!
Removing the cover may expose you to harmful electrical voltages
and will void the warranty.
The Western Digital FireWire Hard Drive is not intended as a
!
portable device.
Record Your FireWire Hard Drive Information
In the table that follows, enter the serial number and model number
listed on your new Western Digital FireWire Hard Drive. The
complete serial number and model number are on the large label on
the bottom of the drive.
You will need this information for setup and technical support
purposes.
Serial Number:
Model Number:
Gather These Items
Western Digital FireWire Hard Drive
!
6-pin to 6-pin FireWire cable
!
AC power supply and power cord
!
Western Digital FireWire Hard Drive CD-ROM (Windows or
!
Macintosh CD, as appropriate)
Windows 98 SE CD-ROM
!
GETTING STARTED - 3