Uninstalling Ez-Bios - Western Digital WD Caviar Installation Manual

5. From the Choose Destination Partition screen, select the
partition you want to overwrite. The selected partition
displays on the Destination screen. EZ-Drive copies the
data on the Source partition to the Destination partition.

Uninstalling EZ-BIOS

This option removes EZ-BIOS and returns control of the drive
to your system BIOS.
You will need to uninstall EZ-BIOS if you make any of the
following changes to your system.
Upgrade your system BIOS to support the full capacity of
all hard drives in your system.
Install an EIDE controller card with onboard BIOS that
supports the full capacity of all hard drives in your system.
Move your hard drives to a system that supports the full
capacity of all hard drives in your system.
IMPORTANT. Before disabling EZ-BIOS, make sure that you
have properly configured the system BIOS to recognize the
drive capacity.
1. Boot from your EZ-Drive disk.
2. From the EZ-Drive main menu, select Advanced Options.
3. From the Advanced Options screen, select EZ-BIOS Setup.
4. Select the drive you want to change. Press
5. Select Controlled by EZ-BIOS. Press
selection to Disabled. A warning message displays. Press Y
to disable EZ-BIOS.
6. Reboot the system and verify that the system operates
properly.
26 EZ-Drive Software Installation
.
ENTER
to toggle the
ENTER