Usb Device - VeriFone e355 User And Best Practices Manual

•
Micro-USB port on the bottom of this frame is for simultaneous charge.
Barcode Button
Lightning Connector
8-Pin Interface To Smart Charger
Figure 10

USB Device

The USB device interface is used in Mobile PINpad mode for frame ID values
Android and Windows. The USB device port connects to Android/Windows device
through an 8-pin frame connector. The side Micro-USB is not accessible for USB
downloads when e355 is in Android/Windows frame configuration.
Android Frame
Key Points:
•
This frame is with Micro-USB type B connector.
•
e355 is an accessory to Android device.
•
As an accessory, e355 cannot wake-up Android device.
•
PMR-MUX2 protocol is used over USB device interface.
•
Android charging is set by HW resistor ID to charge at 1.8 A when external AC
power is connected to frame.
•
Barcode trigger buttons are available on Android frame.
USB Port for
Simultaneous Charge
Frame for iPod 6
C
OMMUNICATION
Side Micro USB Port
355/ 265 U B P
E E SER AND EST
I
NTERFACES
USB
33
G
RACTICES UIDE