Barcode Diag; Icc (Contactless) Diag - VeriFone e355 User And Best Practices Manual

Barcode Diag

Tests the barcode reader. Firmware version of barcode module is displayed after
turning ON the scanner and LEVEL trigger mode is enabled. Press barcode
buttons for scanning the barcode.
Barcode Diagnostic
1> Turn ON Scanner
2> Turn OFF Scanner
Scanned Data:
Figure 23
ICC (Contactless)
Diag
contactless reader. OS Version QTE50301-20160513 and later supports this
contactless diag.
SMART CARD DIAG
1> CHIP CARD DIAG
2> CONTACTLESS DIAG
3> LIST SYNC DRIVERS
4> EXIT
Figure 24
Barcode Diagnostic
Firmware: PAABL05-004-R00
1> Turn ON Scanner
2> Turn OFF Scanner
Scanned Data:
Barcode Diag Menu Options
Checks the versions of contactless library and driver, and runs diagnostics on
CONTACTLESS DIAG
1> VERSION INFO
2> FIELD ON
3> FIELD OFF
4> TAP AND TEST
5> EXIT
Contactless Diag Menu Options
Barcode Diagnostic
Firmware: PAABL05-004-R00
1> Turn ON Scanner
2> Turn OFF Scanner
Scanned Data:
697941860802
CTLS TAP & TEST
TAP Card or
Press CANCEL to Exit
355/ 265 U B P
E E SER AND EST
S M - VTM
YSTEM ODE
Diags
55
G
RACTICES UIDE