VeriFone e355 User And Best Practices Manual page 34

C I
OMMUNICATION NTERFACES
USB
34
355/ 265 U
E E SER AND
•
Communication link will be broken between e355 and Android device when
external AC power is connected to frame, link will be re-established after
external AC power disconnection.
Figure 11 Frame for Android
Windows Frame (HP Tablet)
Key Points:
•
e355 is an accessory to Windows device.
•
As an accessory, e355 cannot wake-up Windows device.
•
PMR-MUX2 protocol is used over USB device interface.
•
Windows charging is set by Power Delivery (PD) controller to charge at 1.5A
when external AC power is connected to frame.
•
Barcode trigger buttons are available on Windows frame.
•
Communication link is broken between e355 and Windows device when
external AC power is connected to frame.
Side Micro-USB port
Key Points:
•
For charging e355 only.
•
Software package downloads over USB from PC.
•
Service board connection for downloads over serial port and logging
•
Pass-through connection to tablet (data sync).
•
Virtual communications ports (COM1A,..COM1E) are not supported over this
port.
•
Control commands are supported and accessed via side Micro-USB port in
iOS frame configurations. Command format is defined in control application
document.
B P G
EST RACTICES UIDE
Gang Charger Pins
Power Barrel Connector
Side Micro-USB Connector
Barcode Buttons
Frame Connector