Monitoring Ieee 802.1X Status And Statistics - Cisco Catalyst 3850 Manual

Monitoring IEEE 802.1x Status and Statistics

Figure 12
show running-configuration
hostname 3850-access-Bld1Flr1
!
!
aaa new-model
!
aaa authentication dot1x default group radius
!
ip device tracking
!
!
dot1x system-auth-control
!
!
aaa session-id common
interface GigabitEthernet1/0/1
switchport access vlan 10
switchport mode access
switchport block unicast
switchport voice vlan 11
ip arp inspection limit rate 100
trust device cisco-phone
authentication event server dead action authorize vlan 20
authentication event server dead action authorize voice
authentication host-mode multi-auth
authentication port-control auto
mab
dot1x pae authenticator
storm-control broadcast level pps 1k
storm-control multicast level pps 2k
storm-control action trap
Ipv6 nd raguard attach-policy endhost_ipv6_raguard
Ipv6
auto qos voip cisco-phone
service-policy input AutoQos-4.0-CiscoPhone-Input-Policy
service-policy output AutoQos-4.0-Output-Policy
ip verify source
ip
!
!
radius server AuthServer
address ipv4 192.168.254.14 auth-port 1645 acct-port 1646
key cisco123
Monitoring IEEE 802.1x Status and Statistics
Step 1 Use the show dot1x statistics command to display switch-related and port-related IEEE 802.1x
statistics.
Best Practice User Guide for the Catalyst 3850 and Catalyst 3650 Switch Series
76
how running-configuration command for Provision in High-Impact Mode
guard attach-policy endhost_ipv6__guard
snooping limit rate 100
Access Control on the Wired Network