Cisco Catalyst 3850 Manual page 87

Access Control on the Wired Network
To detect errors, filter the dot1x verbose messages that are enabled by default.
show dot1x statistics
Dot1x Global Statistics for
--------------------------------------------
RxStart = 7
RxReq = 0
RxTotal = 29
TxStart = 0
TxReq = 0
TxReqID = 8
TxTotal = 8
Use the show dot1x interface statistics command to display IEEE 802.1x statistics for a specific port.
Step 2
show dot1x
Dot1x Authenticator Port Statistics for GigabitEthernet1/0/1
--------------------------------------------
RxStart = 10
RxInvalid = 0
TxReq = 0
RxVersion = 1
Use the show dot1x all command to display the IEEE 802.1x administrative and operational status for
Step 3
a switch.
.
show dot1x all
Sysauthcontrol
Dot1x Protocol Version
Dot1x Info for GigabitEthernet1/0/1
-----------------------------------
PAE
QuietPeriod
ServerTimeout
SuppTimeout
ReAuthMax
MaxReq
TxPeriod
RxLogoff = 0
RxInvalid = 0
TxLogoff = 0
ReTxReq = 0
ReTxReqID = 0
interface g1/0/1 statistics
RxLogoff = 0
RxLenErr = 0
TxReqID = 11
LastRxSrcMAC = 0023.33db.e970
Enabled
= AUTHENTICATOR
= 60
= 0
= 30
= 2
= 2
= 30
Best Practice User Guide for the Catalyst 3850 and Catalyst 3650 Switch Series
Monitoring IEEE 802.1x Status and Statistics
RxResp = 0 RxRespID = 8
RxLenErr = 0
TxResp = 0
ReTxReqFail = 0
ReTxReqIDFail = 0
RxResp = 0 RxRespID = 10
RxTotal = 37
TxTotal = 11
3
77