Identify Configuration Values - Cisco Catalyst 3850 Manual

Identify Configuration Values

We recommend that you identify certain switch configuration values in advance so that you can proceed
without interruption. We recommend that you take a print out of Table 7, and, as you follow the
configuration sequence, replace the values in column B with your values in column C.
Note Depending on your authentication server settings, the authentication and accounting ports could be
assigned the values 1812 and 1813 respectively.
Note Replace the blue italicized example values with your own values.
Table 7
A. Value Name
Interface range
RADIUS server
RADIUS server IPv4 address
Auth-port
Acct-port
RADIUS server encryption key
Data VLAN
Voice VLAN
Auth-server dead vlan
Extended IP ACL
Configuration examples begin in global configuration mode, unless noted otherwise.
Note
Best Practice User Guide for the Catalyst 3850 and Catalyst 3650 Switch Series
66
Secure Access Control for Wired Network Values
B. Example Value Names
GigabitEthernet
1/0/1-1/0/24
AuthServer
192.168.254.14
1656
1646
cisco123
10
11
20
LowImpactSecurity-acl
Access Control on the Wired Network
C. Your Value