Displaying 802.1X Statistics And Status - Cisco Catalyst 3750 Software Configuration Manual

Metro switch

Hide thumbs Also See for Catalyst 3750:

Table of Contents

Configuring 802.1x Port-Based Authentication

Displaying 802.1x Statistics and Status

To display 802.1x statistics for all ports, use the show dot1x all statistics privileged EXEC command.

To display 802.1x statistics for a specific port, use the show dot1x statistics interface interface-id

privileged EXEC command.

To display the 802.1x administrative and operational status for the switch, use the show dot1x all

privileged EXEC command. To display the 802.1x administrative and operational status for a specific

port, use the show dot1x interface interface-id privileged EXEC command.

For detailed information about the fields in these displays, refer to the command reference for this

Catalyst 3750 Metro Switch Software Configuration Guide