Cisco Catalyst 3850 Manual page 108

Show Running Configuration for Wireless LAN Converged Access
show running configuration
ip arp inspection vlan 10-11,100
!
ip device tracking
ip snooping vlan 10-13,100,200
no ip
ip snooping wireless bootp-broadcast enable
!
! the default router for subnet 192.168.12.x /24 is the upstream router
! 192.168.12.2 is the layer 3 address of the 3850 vlan interface on vlan 12
!
ip excluded-address 192.168.12.1
ip excluded-address 192.168.12.2
!
!
!Access Point IP
!
ip pool APVlan12-pool
network 192.168.12.0 255.255.255.0
default-router 192.168.12.1
!
! Vlan 200 for wireless clients, and the subnet 192.168.13.x /23
! the
vlan 200
name Wireless_Client
!
<snip>
!
! remember to exclude 192.168.13.2 on the
on the vlan 200 intf
interface Vlan200
description wireless Clients
ip address 192.168.13.2 255.255.255.0
!
wireless mobility controller
wireless management interface Vlan12
!
! this is copied from the "show run" output.
wlan OPEN_WLAN 1 WiFi_Open
client vlan 200
no security wpa
no security wpa akm dot1x
no security wpa wpa2
no security wpa wpa2 ciphers aes
no shutdown
!
Best Practice User Guide for the Catalyst 3850 and Catalyst 3650 Switch Series
100
snooping information option
pool defined locally on the 3850
server is external to the 3850.
Converged Wired and Wireless Access
server. Its statically defined