Pre-Pend Feature - Nextel i200plus User Manual

Pre-Pend Feature

The Pre-Pend feature allows you to add Plus Dialing (see "Plus Dialing" on
page 32) to your already stored phone numbers. By adding the "+" to your
already stored numbers, your phone will add the local international access code
needed to place an international call. By using the Pre-Pend feature, you can
automatically add the "+" without having to re-enter the stored number.
NOTE: If you have used Address Book (see "Address Book" on page
93) to transfer your phone lists to your phone, you may want to
use this feature to add Plus Dialing to your phone numbers for
when you travel internationally.
Though you must always first add the "+", you can also add other digits in
addition to the "+". For example, you might want to add an area code if you
don't already have it stored as part of the phone number. Or, you might want to
add a Pause and another series of numbers such as a personal identification
number (PIN) or password. The maximum number of digits is 20.
To add Plus Dialing to an already stored phone number:
Press n until you see the "Prgm" screen.
1
Press o under "Prgm" and enter 2 then 1 to edit a Phone entry.
2
At the Phone List Edit screen, press o under "Ok".
3
At the Edit Entry? press o under "Ok".
4
Press s until the desired entry appears.
5
Press o under "Ok".
6
A flashing cursor displays under the first digit of the stored phone
number.
Press and hold 0 until the Insert screen displays.
7
Press o under "Store" to save your new Plus-enabled number.
8
You now have the option to change the name of this entry if you want.
To change the name, just input the new name. To save the existing
name, skip to the next step.
Press o under "Store" to save.
9
You now have the option to change the Speed Dial location of this entry
if you want. To change the Speed Dial number, just input the new
number. To save the already-assigned Speed Dial number, skip to the
next step.
10 Press o under "Store" to save.
Phone Based
27