Setting The Vibracall® Feature; Setting The Vibracall Feature; Using Vibrate Alert - Nextel i1000 PLUS User Manual

Setting the VibraCall
The VibraCall alert is a vibration alert system that notifies you of
incoming Phone, Private, or Group calls and messages by a repetitive
vibration rather than a ring. You can select this alert system for all
incoming calls/messages, or select individual services for VibraCall.
NOTE: When you set vibration alerts, they are set only for the current
line. If you have a second phone line, you must select "Line 2"
and repeat the procedure for selecting all services or selecting
individual services to vibrate.
VibraCall Settings
Vibrate Alert
Phone Vibrate
Phone Vibrate/
Ring
Mail Vibe
Group/Prvt
Vibe

Using Vibrate Alert

To activate Vibrate Alert:
Press * then # then 9 then P under "All". The
i1000plus phone will emit a brief vibration and will also vibrate
briefly on subsequent power-ups.
Setting the VibraCall® Feature
®
Feature
What this setting does
Vibrates for all incoming calls and
messages.
q —Vibrate All appears on the display.
p —Speaker Off appears on the display to
remind you that the audio will be heard
through the earpiece instead of the speaker.
Vibrates only for incoming phone calls and
Nextel Online data calls.
Vibrates and rings for phone calls and
Nextel Online data calls and Net alerts.
Vibrates for Message Mail and Net alerts.
Vibrates for incoming group and private
calls.
91