Manually Searching For A Network - Nextel i200plus User Manual

Digital, data-capable, multi-service phone
Table of Contents

Advertisement

iDEN Only—This option is useful when you are in an area that is covered
by iDEN and GSM networks, but you want to use iDEN. Your i2000plus
phone attempts to register only on iDEN networks.
GSM Preferred—This option is useful if your home system is GSM and
you travel to a country or region where iDEN is also available. Your phone
will always search for GSM networks first. If a GSM network is not found,
your phone will then search for an iDEN network.
GSM Only—This option is useful when you are in an area that is covered
by iDEN and GSM, but you want to use GSM. Your i2000plus phone
attempts to register only on GSM networks.
NOTE: Nextel and other networks in North and Latin America are gen-
erally supported by iDEN. Networks in other areas of the world
are generally GSM networks. Be aware that some features that
are supported by iDEN networks are not supported when you
connect to a GSM network.
Press n until you see the "Prgm" menu option.
1
Press o under "Prgm".
2
Press 5 then 5. Press o under "Ok".
3
Press s until you see the desired option.
4
Press o under "Ok".
5
Press o under "Exit" when finished.
6
NOTE: When selecting a new protocol (for example, iDEN only to
GSM only) there will be no Exit key.

Manually Searching for a Network

While you are on a GSM network, you can perform an
automatic or manual search for available networks. A
manual search allows you to view the available networks
64
www.nextel.com
a
j
55=Phone Sys
iDEN
Preferred
Exit
Ok
a
b
j
Phone System
iDEN
Only
Cancl
Ok
a
j
57=GSM
Network
Search
Exit
Ok
b
b

Advertisement

Table of Contents
loading

Table of Contents