Finishing The Wireless Setup - Intermec EasyCoder PF2i Installation Instructions Manual

Chapter 5 — Setup in IPL
Th e following regulatory domains are implemented:
Value
FCC (or USA)
IC (or Canada)
ETSI (or EU)
MKK (or Japan)
1 /. Certain restrictions apply to outdoor use in France.
<STX><SI>wt,.REGION<ETX>
Transmits the active region.

Finishing the Wireless Setup

You can now disconnect the printer from the PC. You still need to assign
an IP address, subnet mask, default router, and name server. Th is can be
done via the printer's display and keyboard (provided the server supports
DHCP or BOOTP). If not, you must rely on wireless communication
and use the ARP'n'PING method, which require that there is a work-
ing wireless LAN and the printer is inside the coverage area of an access
point.
54
Countries
U.S.A
Canada
EU countries 1 + Iceland,
Liechtenstein, Norway, and
Switzerland
Japan
EasyLAN Wireless Interface Kit Installation Instructions
Allowed channels
1-11 (default)
1-11
1-13
1-14