5
Setup in IPL
Th is chapter explains how to set up the wireless net-
work communication in printers running IPL v2.40
(or later). Th e only requirement on the PC side is a
terminal program that can transmit and receive ASCII
characters on an RS-232 line. Th us, this method is
recommended when you do not have the opportunity
to run the Intermec EasyLAN Network Setup wizard,
for example because you use some other operating
system than Windows.
For information on how to set up the network com-
munication in printers running Fingerprint, refer to
Chapter 4.
EasyLAN Wireless Interface Kit Installation Instructions
43