Intermec EasyCoder PF2i Installation Instructions Manual page 54

Chapter 5 — Setup in IPL
For all 802.1x parameters, string length is limited to 96 characters.
For all parameters applicable to TTLS or PEAP: Selecting another EAP
type disables these parameters but does not erase their settings.
Using Certifi cates
When an overriding certifi cate is installed, it is converted to DER format
and copied to a specifi c location (/c/ADMIN/root.cer) so that accidental
removal is unlikely. You do not need to keep additional copies of the
certifi cate on the printer after you install the certifi cate.
Some certifi cate formats (notably PKCS #12) encrypt data using a pass
phrase. To import certifi cates that include anything other than an empty
pass phrase, the pass phrase is given in the same string as the path to the
certifi cate fi le. Th e pass phrase is never stored on the printer and is used
only once to convert the public key to a non-encrypted format.
To reinstall the default root CA certifi cate, install /rom/intermec.cer, or
remove the /c/ADMIN/root.cer fi le.
Examples
<STX><SI>ws,EAP_TYPE,TTLS|LEAP|PEAP|OFF<ETX>
Sets preferred EAP type.
<STX><SI>ws,.EAP_USER,Admin01<ETX>
Sets logon user name to "Admin01".
<STX><SI>ws,EAP_PASS,InfoTech<ETX>
Sets logon password to "InfoTech".
<STX><SI>ws,TTLS_USER,Manufacturing<ETX>
Sets TTLS outer name to "Manufacturing".
<STX><SI>ws,INNER_AUTH,PAP|MSCHAPv2|EAP/
MSCHAPv2|EAP/MD5|EAP/GTC<ETX>
Sets inner authentication type (TTLS/PEAP only).
<STX><SI>ws,CA_CERT,/tmp/mycacert.cer<ETX>
Installs overriding CA certifi cate (TTLS/PEAP only).
<STX><SI>ws,CA_CERT,/tmp/mycacert.
pfx@verysecret<ETX>
Installs overriding CA certifi cate with pass phrase "verysecret"(TTLS/
PEAP only). Th is method can be used only when the certifi cate has
already been transferred to the printer (for example, via FTP or an
installed Compact Flash card).
50 EasyLAN Wireless Interface Kit Installation Instructions