Table of Contents
Advertisement
When an Error Message Appears
If an abnormality occurs in the print processing or the memory is full, or you encounter operation problems, a
message appears on the display. Find out more information about messages in the following list.
Auto Continue
●
If you set <Auto Skip Error> to <On> in the setting menu of the operation panel, the printing is continued
with the error skipped regarding the error messages marked with
Error(P. 358) ). If the error skip causes missing print data or improper printouts, print the file again.
To cancel printing
●
When you want to cancel the current printing regardless of the error message, perform a soft reset.
Reset(P. 448)
About <Show Warnings>
●
You can specify settings not to display some messages showing that printing can be continued.
Warnings(P. 359)
16 Tnr cart. will soon reach end of lifetime.
The replacement time for the toner cartridge is near.
●
Make sure that you have a replacement toner cartridge ready.
●
Replace the toner cartridge if you see this message before you start to print a large job.
Replacing Toner Cartridges(P. 510)
1F Output tray is full.
Too much paper is on the output tray.
●
Remove the paper from the output tray.
1G Change toner cartridge recommended.
The toner cartridge has reached the end of its lifetime.
●
Replacing the toner cartridge with a new one is recommended.
●
You can continue printing when this message is displayed, but the print quality may deteriorate.
●
Receiving e-mail and fax documents will be disabled.
(P. 153)
Troubleshooting
Printing Received E-mail (E-Mail Print)
468
in the list (
Auto Skip
Replacing Toner Cartridges(P. 510)
167A-06C
Soft
Show
Advertisement
Table of Contents
