Table of Contents
Advertisement
Chapter 3
BIOS Configuration
USB Controller Resume
Set this option to Enabled to enable USB controller (Universal Serial Bus)
resume. The settings are Enabled or Disabled.
RI Resume
Set this option to Enabled to enable RI resume. The settings are Enabled or
Disabled.
LAN Wake-up
When this option is Enabled, the system will wake up when a signal is
received on the Wake-on LAN header. In order for this wake up function to
work, the system must have been brought up at least past the POST before it
was last shut down (i.e. if you turn the system off before the POST, the
registry will not be set, and the system will not be able to wake up using this
function). This function requires an ATX 2.01 compliant power supply with 5V
standby (STB5V) current of at least 800mA. The settings are Enabled or
Disabled.
50
http://www.tyan.com
Advertisement
Table of Contents
