Table of Contents
Advertisement
comoputer is in the power-conserving state. The settings are 12.5%, 25%,
37.5%, 50%, 62.5%, 75%, or 87.5%.
Time Overflow Enable
Set this option to Enabled to enable the SMI timer overflow. The settings are
Enabled or Disabled.
Thermal SMI Enable
Set this option to Enabled to enable the thermal SMI. The settings are Enabled
or Disabled.
PMI SMI Enable
Set this option to Enabled to enable the PME SMI. The settings are Enabled
or Disabled.
SW SMI Timer Enable
Set this option to Enabled to enable the software SMI timer. The settings are
Enabled or Disabled.
TCO Logic SMI Enable
Set this option to Enabled to enable the TCO logic SMI. The settings are
Enabled or Disabled.
Device #4 SMI Enable
Set this option to Enabled to enable the Device #4 SMI. The settings are
Enabled or Disabled.
Device #5 SMI Enable
Set this option to Enabled to enable the Device #5 SMI. The settings are
Enabled or Disabled.
RTC Resume
If Enabled, this option allows you to set an hour and minute for the system to
resume (wake up). The next two fields allow you to choose the wake up time.
Note that the time fields will not be available if this option is set to Disabled. In
order for this wake up function to work, the system must have been brought
up at least past the POST before it was last shut down (i.e. if you turn the
system off before the POST, the registry will not be set, and the system will not
be able to wake up using this function). The settings are Enabled or Disabled.
S2054 Tomcat i810
49
Advertisement
Table of Contents
