Chapter 2
Board Installation
Pin 1 on the CPU is
denoted by a small dot
on one of the corners
and Pin 1 on the ZIF
socket is denoted by
an angled corner (see
figure 2-. Never force a
CPU into a socket.
Forcing a CPU to seat
will bend the pins on
the CPU and possibly
damage the mother-
board.
Push down lightly on the CPU, and lower the arm on the ZIF socket to secure
the CPU. A squeaking noise is normal as the arm lowers. After the CPU is
securely seated, install the appropriate cooling device. Tyan strongly
recomends a heatsink/fan combination. Consult with your case manufacturer
for other cooling options.
Figure 2-6
Figure 2-7
22
http://www.tyan.com