Chassis Intrusion Alarm Connector - TYAN S2054 User Manual

1. Setting Jumpers
Note: There are no Jumper settings for CPU bus speed or clock multiplier on
the S2054 board. The Tomcat i810 is designed to automatically detect the
socketed Celeron CPU and its proper speed settings.
1-A. J9 External Pin Assignments
VCC
LED
Ground
Switch
VCC
IRRX
Ground
IRTX
RESV
1-B. Power LED (J14)
Pin 1
+5 VSB
LED YEL
1-C. Wake-On Ring Connector (J28)
Pin 1
+5 VSB Ground
1-D. Wake-On LAN Connector (J2)
Pin 1
+5 VSB Ground
1-E. Chassis Intrusion Alarm Connector (J1)
The J7 connector is an intrusion alarm, that can be
connected to the system chassis. When active (J7 is
connected to the chassis), this alarm will alert the system
administrator anytime someone opens the system's case.
1-F. CPU Fan (J11) / Chassis Fan (J12) Connector
Pin 1
Ground
S2054 Tomcat i810
1 2 LED Green
3 4 LED Yellow
5 6 Power On/Off
7 8 Ground
9 10 FP_SLP#
11 12 Ground
13 14 KEY
15 16 IR PWR
17 18 RESV
2 3
VCC
Ground
LED GRN
2 3
WOR
2 3
WOL
2 3
+12V Speed
15
Pin1
Top Pin
Pin17
Bottom Pin
J9 Side View
Jumper J14 is a 3-pin ACPI LED
header. If you need a 2-pin Power
LED header, use jumper J9 above.
CPU Fan
J1, J2, J28
Pin2
J9,
Chassis Fan