Connecting The Power Supply - TYAN S2054 User Manual

Connecting Com and Printer Ports
Warning: When plugging in your keyboard and mouse, or when plugging
warning
anything into a serial or Com port, make sure that the power is off. Connecting
these devices and ports while the power is on is called "hot plugging," and
may damage your system.
Note: Only TYAN cables will work on this motherboard. If you are using an
existing case with old cables, your system will not function properly. Use only
TYAN-approved cables.

8. Connecting the Power Supply

The Tomcat i810 requires an ATX power supply. Tyan recommends using one
that conforms to industry standard revision 2.01. The photos on the next page
show the ATX power connector before (Figure 2-11) and after (Figure 2-12) it
has been plugged in. The plastic clip on the power connector should lock over
the plastic tab on the onboard connector. You shouldn't be able to plug the
power connector in any other way but just to be safe, make sure it looks like
Figure 2-12.
Figure 2-11 Figure 2-12
*Note: The image above is used to illustrate a concept and may not represent the actual
image of your motherboard.
S2054 Tomcat i810
27