Daikin E-Series Service Manual page 156

SiENBE12-620
To adjust the vertical blades (louvers)
•
Notes on flap and louvers angles.
• Unless [SWING] is selected, you should set the flap at a near-
horizontal angle in COOL or DRY mode to obtain the best
performance.
• In COOL or DRY mode, if the flap is fixed at a downward position, the
flap automatically moves in about 60 minutes to prevent condensation
on it.
ATTENTION
• Always use a remote control to adjust the flap angle.
If you attempt to move it forcibly with hand when it is swinging, the mechanism may be broken.
• Be careful when adjusting the louvers. Inside the air outlet, a fan is rotating at a high speed.
System Configuration
When adjusting the louver, use a robust and
stable stool and watch your steps carefully.
Hold the knob and move the louvers.
(You will find a knob on the left side and the
right side blades.)
DRY
COOL
FAN
HEAT
Instruction
147