Check Method 2 - Daikin F-Series Service Manual

SiBE12-713
3.2

Check Method 2

1. Enter the diagnosis mode.
2. Press the TEMP button.
3. Diagnose by the sound.
4. Enter the diagnosis mode again.
Service Diagnosis
Press the 3 buttons (TEMP ,TEMP , MODE) simultaneously.
The digit of the number of tens blinks.
Try again from the start when the digit does not blink.
Press TEMP or TEMP
"pi" : The number of tens does not accord with the error code.
"pi pi" : The number of tens accords with the error code.
"beep" : The both numbers of tens and units accord with the error code. (
Press the MODE button.
The digit of the number of units blinks.
and change the digit until you hear the sound of "beep" or "pi pi".
Service Check Function
(R4272)
(R4273)
(R4274)
→
See 7.)
(R4275)
(R4276)
231